Filter
Top Products
28
ᕧ Turning off the Projector
To turn off the projector:
3. Projecting an Image (Basic Operation)
POWER
VIDEO S-
VIDEO
COMPUTER-1 COMPUTER-2
WARNING
LAMP REPLACE
AUTO PC
VOL
-
VOL
+
POWER
OFF
NO SHOW
D.ZOOM
PAGE
MENU
BACK
First, press the POWER button on the projector cabinet
or the OFF button on the remote control. The “Power Off /
OK?” message will appear.
CAUTION
Do not unplug the power cord from the wall outlet or do not turn off
the main power under any one of the following circumstances. Doing
so can cause damage to the projector:
• While the Hour Glass icon appears.
• While the cooling fans are running. (The cooling fans continue to
work for 30 seconds after the projector is turned off)
• While the lamp is lighted.
A
C IN
F
O
C
U
S
V
O
L
-
V
O
L
+
Z
O
O
M
ᕨ After Use
Preparation: Make sure that the projector is turned off.
1. Unplug the power cord.
2. Disconnect any other cables.
3. Retract adjustable tilt feet if extended.
4. Cover the lens with the lens cap.
5. Put the projector and its accessories in the supplied soft case.
Secondly, press the OK button or press the POWER or
the OFF button again.
The POWER indicator will glow orange. After the projec-
tor turns off, the cooling fans keep operating for 30 sec-
onds (Cooling-off time).
Immediately after turning on the projector and displaying
an image, you cannot turn off the projector for 60 sec-
onds.
Finally, turn off the Main Power switch. The power indica-
tor will go out.
POWER
WARNING
LAMP REPLACE
POWER
WARNING
LAMP REPLACE
POWER
WARNING
LAMP REPLACE
Power On Fan running Standby
Steady green light Blinking
orange light
Steady orange
light