Canon LV-8320 Projector User Manual


 
11



Connect the S-VIDEO output signal from
video equipment to this jack (p.17).

Connect the audio output signal from
video equipment connected to or to
this jack. For a mono audio signal (a single
audio jack), connect it to the L (MONO)
jack (p.17).

Connect the audio output (stereo) from a
computer or video equipment connected
to or to this jack (pp.16, 18).

Connect the composite video output signal
to this jack (p.17).

Connect output signal from a computer, RGB
scart 21-pin video output or component video
output to this terminal (pp.16,18).

Connect an external audio amplifier to this
jack (pp.16-18).
This terminal outputs sound from AUDIO IN
terminal (, or ), or HDMI terminal (2)
(digital audio).
Never plug headphones and earphones into
this jack.

Connect the LAN cable (refer to the user’s
manual of "Network Set-up and Operation").

When controlling the projector with
RS-232C, connect the control equipment
to this connector with the serial control
cable.

– Connect computer output to this terminal
(p.16).
– This terminal can be used to output the
incoming analog RGB and Component
signal from COMPUTER IN 1/
COMPONENT IN terminal to the other
monitor (pp.16,18).

Connect the audio output (stereo) from a
computer or video equipment connected
to to this jack. Or connect the MIC to
the this jack (pp.16, 18).

Connect the HDMI signal (including sound
signal) from video equipment or from
computer to this terminal (pp.16, 17).
is registered trademarks of HDMI
Licensing, LLC.