Filter
Top Products
39
Choose or
by pressing the COMPONENT or
the COMPUTER 1 button on the remote controller. Choose HDMI by pressing the HDMI button on the
remote controller or you can press the INPUT button on the top control to choose the desired input
source.
Before using these buttons, correct input source should be selected through Menu operation as
described below.
1
2
Use the Point ▲▼ buttons to select
COMPUTER 1 and then press the Point ►
button.
,,
When the input source is coming
from video equipment connected
to the COMPUTER IN 1/
COMPONENT IN terminal with a
COMPONENT-VGA Cable, select
.
When the input source is coming
from video equipment connected
to the COMPUTER IN 1/
COMPONENT IN terminal with a
Scart-VGA Cable, select .
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼ buttons
to select and then press the Point ►
button or the OK button.
When the Auto input function is set to On 1 or On
2, the input signal will be searched automatically
(p.47).
3
Use the Point ▲▼ buttons to select
or and then press the
OK button.
Direct Operation
Menu Operation
Press the Point ▲▼ buttons
to select or
.
HDMI
When video input signal is
connected to the HDMI jack,
select HDMI.