Filter
Top Products
31
Auto PC Adjustment function is provided to automatically adjust , ,
and to conform to your computer.
The adjusted parameters from the Auto PC
Adjustment can be stored in the projector.
Once the parameters are stored, the setting
can be done just by selecting a in
the PC System Menu (p.30). See also “Store”
on page 33.
• , , and
of some computers cannot be
fully adjusted with the Auto PC Adjustment function.
When the image is not provided properly with this
operation, manual adjustments are required (pp.
32-33).
• The Auto PC Adjustment cannot be operated when
480i, 575i, , , , 1035i or 1080i is
selected in the PC System Menu (p. 30), or when
the signal is coming from the HDMI terminal.
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select and then press
the Point ► button or the OK button.
1
2
Use the Point ▲▼ buttons to select
PC and then press the OK button.
Menu Operation
Use Point ▲▼ buttons to select
PC and press the OK button. Please
appears while the Auto PC
adjustment is in process.