Filter
Top Products
36
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼ buttons
to select and then press the Point ►
button or the OK button.
Use the Point ▲▼ buttons to select the
desired item and then press the OK button.
This projector has the picture screen resize function, which enables you to customize the image size.
Provide the image to fit the screen size.
True
Provide the image in its original size. When the
original image size is larger or smaller than the
screen size (1280 x 800), the projector enters
to the panning mode automatically. Use the
Point ▲▼◄► buttons to pan the image. When
adjusted, the arrows will turn blue. When reached
to the correction limits, the arrows will disappear.
Full
Provide the full screen image.
• This projector cannot display any resolution
higher than 1920 x 1200. If your computer’s
screen resolution is higher than it, reset the
resolution to the lower before connecting to
the projector.
• The image data in other than 1280 x 800
is modified to fit the screen size in initial
mode.
• True and are disabled
and cannot be displayed when 480i,
575i, , , 1035i or 1080i is
selected in the PC System Menu (p. 30).
• When True is selected in the Screen menu,
can not be selected.
1
2
Provide the last stored aspect screen image.
Provide the image at the 16:9 wide screen ratio.
Adjust the screen scale and position manually with
this function. Press the Point ► button at
. and the Custom adjustment menu is displayed
on the screen, you can use the Point ▲▼ buttons
to choose the item you want to adjust.
...... Adjust the Horizontal/Vertical
screen scale.
H&V ............... When set to On, the aspect
ratio is fixed. The
appears dimmed and becomes
unavailable. Adjust , then
the screen scale is automatically
modified based on the aspect
ratio.
.. Adjust the Horizontal/Vertical
screen position.
....... Save the adjusted scale or
position to all the inputs. Press
the OK button at to
display a confirmation box. To
save the scale or position, press
the OK button at . When
is selected, the saved
scale or position is used.
Reset ............. Reset the all adjusted values.
Press the OK button at Reset to
display a confirmation box. To
reset, press the OK button at .
• When no signal is detected, is set
automatically .
• The adjustable range for and
is limited depending on the input
signal.
Scale the image proportionally to fit the entire
screen. Either side of image may go over the
screen.