Filter
Top Products
27Setting Up the Machine and the Computer (Macintosh)
2-2 Setting Up an Additional LAN-connected
Computer (continued from step 12 on page 22)
1 Make sure that the machine is connected to
the network device with a LAN cable.
2 On the Canon IJ Network Tool screen,
select LAN connection, then click OK.
If the Canon IJ Network Tool does not start up
automatically, select Library > Printers > Canon >
BJPrinter > Utilities > Canon IJ Network Tool.
3 When the screen shown on the right appears,
click OK.
4 Select Setup in the pop-up menu, then click
Register Printer.
Important
To set up an additional LAN-connected computer, the necessary software must be installed on the
additional computer. See “1 Preparing for Setup” on page 17 and “2 Installing the Software” on page 18 to
confirm that the software installation is complete, then proceed with the procedure below.
Note
z If MAC address filtering is configured to restrict
access to the machine, make sure beforehand to
register the address of the computer you are setting
up. To register the address, use the Canon IJ
Network Tool on the computer that has already been
set up.
z Make sure that the computer you are setting up is
not connected to the machine with a USB cable.
This setup procedure does not involve connecting
the USB cable.
Note
If you select USB connection, the Canon IJ Network
Tool will exit without setting up the machine to be used
over wired LAN.