Filter
Top Products
42
PROJECTING AN IMAGE FROM AV EQUIPMENT
PROJECTING AN IMAGE
FROM AV EQUIPMENT
Connecting the Projector to AV Equipment
Connect the projector and AV equipment.
Connecting to Video Terminals
• Before connecting cables, turn off both the projector and computer.
• SCART terminal is not supported.
To analog video output
(AV input
terminal)
To digital
video output
To component video output
S terminal
video cable
Video
cable
Component
cable (D ter-
minal/RCA x
3)
(S-VIDEO
terminal)
Supplied component
cable (RCA/Mini D-sub
15-pin)
AV
cable
(D terminal)
(DVI terminal)
(VIDEO
terminal)
(RCA terminal)
DVI
cable
*A component cable
available on the
market is required
to connect the
projector to AV
equipment. (See
memo.)
Component
cable (RCA x 3)
About the Component Cable
The projector cannot be connected to AV equipment using only the supplied component
cable (RCA/Mini D-sub 15-pin). Purchase either of the following cables according to the
type of the terminal on the AV equipment:
• RCA terminal: RCA x 3/RCA x 3
• D-terminal: D-terminal/ RCA x 3