Filter
Top Products
107
Adjusting Image Quality (Image Adjustment)
Operation Setting Functions from Menus
Specifying the Lamp
Mode
> [Image adjustment] > [Lamp mode]
Reducing the lamp brightness
reduces power consumption and
cooling fan noise.
You can access the [Lamp mode]
menu by pressing the ECO button on
the remote control.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default is [Full power].
• The adjustment you have made is stored as
adjusted values for the input signals and
image mode of the current projection.
Resetting Image
Adjustment Settings
> [Image adjustment] > [Reset]
You can reset the current image
adjustment settings to the default
settings. If reset is performed when
user setting 1–5 is selected for
[Image mode], the settings are
returned to the settings that were
saved in [User 1–5].
• Only the setting for the combination of input
signal and image mode for the current
projection is reset.
HDMI Component LAN
Digital PC Analog PC USB
Full
power
Projects images at full
brightness.
Power
saver
Reduces lamp brightness to
save energy.
HDMI Component LAN
Digital PC Analog PC USB
OK Resets the image adjustment
settings.
Cancel Cancels resetting of the image
adjustment settings.