Filter
Top Products
Installation-Related Menu Settings
154
Specifying a Menu
Position
> [Install settings] > [On screen] >
[Menu position]
You can change the position of
menus displayed.
Use the [ ] / [ ] / [ ] / [ ] buttons to
move the menu to the desired position.
After you have moved the menu to the
desired position, press the OK button to
accept your setting, and then press the
MENU or EXIT button.
Showing/Hiding the
Guide Screen
> [Install settings] > [On screen] >
[Guide]
You can select whether to show or
hide the guide screen which explains
operations.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default is [On].
• The guide screen is shown at the following
times.
- When no input signal can be detected.
(P145)
- When an invalid button is pressed in the
[BLANK], [FREEZE] or [D.ZOOM] mode.
(P76, P78)
- When the positional lock is set to [On].
(P146)
- When the projector is already on and the
POWER button is pressed again.
HDMI Component LAN
Digital PC Analog PC USB
HDMI Component LAN
Digital PC Analog PC USB
Off Hides the guide screen.
On Shows the guide screen.