Filter
Top Products
135
Setting Various Functions
User’s Manual Settin
g
Functions from Menus
Lamp Warning Display
[Lamp warning display]
A message that advises you to change the
lamp can be set to display when the lamp
has been used for the specified period of
time.
MENU > [Install settings] > [On screen] > [Lamp
warning display]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
• The factory default is [On].
• Regardless of the [Lamp warning display]
setting, when the lamp replacement time has
been reached, the LAMP indicator on the
projector will flash.
Resetting the Lamp
Counter
[Lamp counter]
You can reset the lamp counter that indi-
cates the time for lamp replacement.
MENU > [System settings] > [Other settings] >
[Lamp counter]
MENU > [System settings] > [Other settings] >
[Lamp counter]
HDMI Component
Digital PC Analog PC
Off The lamp warning display is not
displayed.
On The prepare lamp message and
the lamp warning display are dis-
played.
HDMI Component
Digital PC Analog PC
Do not reset the lamp counter except
when you have replaced the lamp.
Otherwise, the lamp counter cannot
indicate the correct timing for replac-
ing the lamp.
For details of lamp replacement, refer
to page 195.