Filter
Top Products
E-31
Bar Code Specifications
*1 The check digit is automatically calculated in accordance
with input data. For EAN-13, EAN-8, UPC-A, and ITF,
the check digit is appended at the end of the printed
digits. For CODE39 and CODABAR, the check digit is
appended one digit before the final digit (when a check
digit is used).
*2 UPC-E includes a check digit, but it is not printed as a
numeral below the bar code.
*3 The number of digits printed below a bar code equals
the input characters plus automatically appended char-
acters.
*4 An error message is displayed whenever there are in-
sufficient digits. The unit will not allow input of too many
digits.
*5 An error message appears and printing is impossible if
an odd number of digits are input when an ITF check
digit is not being used. Append a zero to the beginning
of the digits and re-input.
*6 An error message appears and printing is impossible if
an even number of digits are input when an ITF check
digit is being used. Append a zero to the beginning of
the digits and re-input
*7 Both the start code and end stop code of CODE39 must
be asterisks.
*8 An error message appears and printing is impossible if
any characters other than those specified here are used.
*9 With CODABAR, A, B, C, or D can be used as the start
code and stop code. An error message appears and print-
ing is impossible if any other character is used.
Check
Digit *1
Yes
Yes
Yes
(Yes) *2
No
Yes
No
Yes
No
Yes
Print
Digits *3
13
8
12
6
4 to 22
4 to 22
4 to 22
4 to 22
4 to 22
4 to 22
Input Digits
*4
12
7
11
6
4 to 22 (even only) *5
3 to 21(odd only) *6
2 to 20
1 to 19
4 to 22
3 to 21
Input Characters
*8
Numerals
Numerals
Numerals
Numerals
Numerals
Alpha-numeric characters; hyphen; period;
space; dollar sign; slash; plus sign; percent
sign
Numerals; hyphen; period; dollar sign; colon;
slash; plus sign; letters A through D (first and
final digits only) *9
Automatically
Assigned
Number of
Digits
—
—
—
—
—
—
2 *7
2 *7
—
—
Check
Digit
*1
1
1
1
—
—
1
—
1
—
1
Bar Code
Type
EAN-13
EAN-8
UPC-A
UPC-E
ITF
CODE39
CODABAR
Troubleshooting
••
••
•
Power Supply
••
••
•
Text Input
Nothing appears on the display.
Possible Cause Action
Improper display con-
trast setting
AC adaptor is not con-
nected correctly.
Adjust display contrast.
Make sure the AC adaptor is
connected correctly.
Cannot input text.
Possible Cause Action
FUNC key has been
pressed.
Press ESC to clear FUNC key
operation.
Tape does not come out when PRINT is pressed.
Possible Cause Action
Tape cartridge com-
partment cover is not
closed completely.
No more tape left in
the cartridge.
Tape jam
Securely close the tape car-
tridge cover.
Replace the tape cartridge with
a new one.
Remove the tape cartridge and
pull out the jammed tape by
hand. Cut off excess tape with
scissors, and carefully replace
the cartridge into the label printer.
Important!
Never allow the tape outlet to
become blocked and never
touch tape as it is being fed
during printing.