Filter
Top Products
Projection Operations
17
To change the size of the sub-window
While a sub-window is displayed, use the [D-ZOOM +] and [D-ZOOM –] keys to select one
of the three available sub-window sizes (small, medium, large).
z When RGB is selected as the input source, certain signal types (1600 × 1200 UXGA
signal, for example) do not support selection of the large sub-window size.
The freeze function stores the current projected image in projector memory, and projects it as
a still image.
To freeze the projected image
1. On the remote controller, press the [FREEZE] key.
z This freezes the image that was being projected when you pressed the [FREEZE] key.
2. To unfreeze the image, press the [FREEZE] key again or press the
[ESC] key.
Freezing the Projected Image (FREEZE)
[D-ZOOM +] key
[D-ZOOM –] key
Large
Medium
Small