Filter
Top Products
24
Using the Setup Menu
This section explains projector operations you need to perform while configuring setup menu
settings. It also provides details about each sub-menu item type.
Basic Setup Menu Operations
The following is the general flow of the steps you need to perform when configuring setup
menu operations.
1. Select the input source whose settings you want to configure.
2. Press the [MENU] key.
z This causes the setup menu screen to appear in the upper left corner of the projected
image.
z The setup menu has a main menu on the left side. On the right side is a sub-menu of
settings that can be configured for the currently selected main menu item.
z The items that appear in the sub-menu depends on the currently selected input source,
and whether or not a signal is being input from the input source. For details, see
“Setup Menu Overview” on page 21.
3. Use the [S] and [T] keys to select the main menu whose sub-menu
contains the settings you want to configure.
z The settings for the selected main menu item appear in the sub-menu.
Setup Menu Screen Operations
Main menu Sub-menu