Filter
Top Products
Using the Setup Menu
35
■Image Adjustment
J
Noise Filter
This sub-menu provides a choice of noise filter levels to remove digital noise from the
projected image when RGB is selected as the input source. Note that the noise filter may not
be able to remove certain types of digital noise.
z This setting is possible only when RGB is selected as the input source. The setting is
saved for the RGB input source only.
z Turning off the projector automatically returns this sub-menu to its initial default setting
(Normal).
Input Source Specific Menu Items
■Image Adjustment
J
Restore Menu Defaults
This sub-menu returns all of the sub-menu items on the Image Adjustment main menu to
their initial default settings.
z You can perform initialization even when there is no input signal. In this case, the
initialization is performed for the currently selected input source.
z “Image Adjustment” main menu “Vertical Position”, “Horizontal Position”, “Frequency”, and
“Phase” settings are initialized for the current signal type (XGA/60Hz, SXGA/60Hz, etc.)
only.
z For details about the initialization procedure, see “To initialize the settings of a particular
main menu item” on page 29.
Volume Adjustment
■Volume Adjustment
J
Volume
This sub-menu can be used to adjust the volume level of the projector’s speaker. This setting
is also linked to volume settings made with the remote controller’s [VOL +] and [VOL –] keys.
z Changing this setting when there is no input signal changes the volume setting of the
currently selected signal source.
z A different setting is stored for each input source.
■Volume Adjustment
J
Restore Menu Defaults
This sub-menu returns Volume to its initial default setting.
z You can perform initialization even when there is no input signal. In this case, the
initialization is performed for the currently selected input source.
z Initialization is performed separately for each input source.
z For details about the initialization procedure, see “To initialize the settings of a particular
main menu item” on page 29.
Input Source Available Items (Parentheses indicate defaults.)
RGB Low, (Normal), High
Component None
S-VIDEO
VIDEO
No Signal