Filter
Top Products
50
Using the Setup Menu
To display the power on password setting screen
1. Perform steps 1 through 4 under “Basic Setup Menu Operations” on
page 24. Select the “Option Settings1” main menu, and then select
the “Power On Password” sub-menu item.
2. Press the [ENTER] key.
z This displays a password input dialog box like the one shown below.
3. Input the current password.
z For information about how to input the password, see “Using the Password Input
Dialog Box”.
4. Press the [ENTER] key.
z If the password you input does not match the currently registered password, the
message “The password you input is wrong”. appears. Press the [ESC] key to
return to step 1.
z If the password you input matches the registered password, pressing [ENTER] above
displays the power on password setting screen.
To turn the power on password on and off
1. Display the power on password setting screen.
z See “To display the power on password setting screen”.
2. Use the [S] and [T] keys to select “Power On Password”, if you
want.