Filter
Top Products
Using the Setup Menu
45
■Input Settings
J
Restore Menu Defaults
This sub-menu returns all of the sub-menu items on the Input Settings main menu to their
initial default settings.
z You can perform initialization even when there is no input signal. In this case, the
initialization is performed for the currently selected input source.
z Basically, initialization initializes the settings of the current input source. Note, however, that
the signal name indicator setting is always initialized, regardless of the currently selected
input source.
z For details about the initialization procedure, see “To initialize the settings of a particular
main menu item” on page 29.
Option Settings1
■Option Settings1
J
Auto Input Detect
This sub-menu lets you specify whether auto detect of the input source should be performed
whenever the projector is turned on (page 5).
Input Source Specific Menu Items
Setting Explanations
On: Turns on auto detection of the input source whenever the projector is turned on.
Off: Turns off auto detection of the input source whenever the projector is turned on.
Setting Storage
A single setting is stored, which is applied to all input sources.
Input Source Available Items (Parentheses indicate defaults.)
RGB (On), Off
Component
S-VIDEO
VIDEO
No Signal