Filter
Top Products
E-23
Removing
1. Make sure that the Handheld Printer Terminal is turned off.
If the power is on, press the power key to turn it off.
2. Turn the terminal upside down. If the hand strap is fi tted to the terminal, remove it.
3. Turn the left and right lock switches for the battery pack cover to the “FREE”
position, and then open the battery pack cover.
4. Slide the battery to the right and lift it directly upwards out of the compartment.
Important!
When removing the battery pack, make sure you do not leave the Handheld
Printer Terminal without a battery pack for more than about 10 minutes. Doing
so can cause data in the memory to be deleted.
Never try to use other type of battery than the ones that are specifi ed for this
product.
When closing the cover after loading the battery pack, check that the battery
pack is loaded correctly. Closing the cover when the battery pack is not loaded
correctly can result in damage.
When removing the battery pack, note that you cannot lift it out of the
compartment while it is pushed to the left. Be sure to slide the battery to the
right and then lift it directly upwards.
•
•
•
•