Filter
Top Products
E-66
4. Before using the cradle ports, remove the caps from the ports.
When using a LAN, connect one end of the LAN cable to the LAN port and the other
end to the PC or hub.
When using a USB connection, connect one end of the USB cable (DT-380USB-A)
to the USB port and the other end to the PC.
The USB host port is used for connecting the cradle with other USB peripheral device.
PC
PC or hub
5. Turn on the power switch on the right side of the Ethernet Cradle. The power LED on
the top of the Ethernet Cradle lights red.
6.
Push the IT-9000 fully into the Ethernet Cradle until the mount hooks in the cradle
engage the mount holes in the IT-9000.
Check that the power LED on the top of the Ethernet Cradle lights green and that
indicator 1 on the IT-9000 lights.
To remove the IT-9000 from the Ethernet Cradle, push the removal buttons to disengage
the mount hooks from the mount holes and then lift the IT-9000 out of the cradle.