Filter
Top Products
E-61
Status of Indicator 1 on IT-9000:
Orange: Charging the battery pack.
Red Flashing: Standby due to battery pack error or the surrounding temperature is
out of the charging temperature range.
(charging begins when the temperature is within the charging
temperature range)
Green: Charging the battery pack is complete.
Status of Indicator 2 on IT-9000:
Blue Flashing: Operating via Bluetooth
®
.
Orange Flashing: Operating via WLAN.
Important!
Always make sure to fi rst remove the Handheld Printer Terminal from the USB
Cradle when switching the selector switch.
Allowing the power supply terminals become wet can cause an electric shock
or fi re. In addition, if the terminals become soiled, contact may be impaired
resulting in poor charging. For reasons of safety and maintaining charging
battery pack(s) in optimum condition, clean the power supply terminals by
wiping with a dry cloth or cotton swab after disconnecting the AC adaptor.
Never short out the power supply terminals of the USB Cradle. This can
damage the USB Cradle.
Do not subject the Handheld Printer Terminal and USB Cradle to vibration or
impact during communication. This can cause communication to be interrupted.
When mounting the IT-9000, securely attach to the mount hooks of the USB
Cradle and make sure that the power LED on the top of the USB Cradle is lit in
green. Charging and communication will not proceed properly if the IT-9000 is
not mounted properly.
Always cap ports that are not being used. Using the USB Cradle while the ports
are uncapped can cause damage.
•
•
•
•
•
•