Filter
Top Products
52
5
Connect the YW-2 wireless adapter to your computer’s USB port.
z The first time you connect a wireless adapter, a hardware installation warning message
may appear on your computer screen. If it does, click the [Continue Anyway] button.
z Connecting the wireless adapter will cause Wireless Connection to start up automatically
and display the dialog box shown below. If this does not happen, go to the Windows
[Start] menu and select [Programs] - [CASIO] - [Wireless Connection].
z When the computer finds the Data Projector, communication will start between them.
z This will establish a wireless LAN connection between the computer and Data Projector
automatically and cause the Wireless Connection window shown below to appear on the
computer screen.
z The contents of the computer screen will be projected automatically at this time.
z For details about Wireless Connection window operations and Data Projector remote
controller operations you can perform after establishing a connection, see “Using Wireless
LAN for Projection” (page 88).
Note
A message like “Wireless Connection.exe is trying to access the Internet” may appear
when the computer you are using has security software installed. If this happens, select
“Always allow (access)” on the dialog box.
6
To terminate Wireless Connection operation, click the [×] button in the upper
right corner of the Wireless Connection window or select [Exit] on the
[Connection] menu.
z This will close the Wireless Connection window and terminate the connection between the
computer and Data Projector. At this time, the projected image will return to the
message in step 2 of this procedure.