Filter
Top Products
72
Creating a Computer Connection Profile
After you modify the settings of the Data Projector’s manual setting profile, you will also
need to modify the existing wireless LAN connection settings (connection profile) of the
computer accordingly, or you will have to create a new connection profile. This section
explains the procedure for using Wireless Connection to create a new profile or to modify
the existing profile of a computer that has a CASIO YW-2 wireless adapter connected.
Important!
For the required computer wireless LAN connection settings when you are using another
manufacturer’s wireless LAN adapter or the computer’s built-in LAN adapter, see the
user documentation that comes with the wireless LAN adapter or the computer you are
using.
To create a new computer connection profile
Note
This procedure shows how to create a new computer connection profile to match
modifications made in the settings of the Data Projector’s connection profile named
“Manual Connection 3”. In this example, the projector’s name (page 68) is “Projector A”.
1
Perform the procedure under “To modify Data Projector manual connection
settings” (page 71) to modify Data Projector’s “Manual Connection 3” profile
settings as shown below.
z For details about each of the settings on the dialog box, see “Manual Connection Setting
Reference” (
page 77).
Dialog Box Item Setting
Profile Name MeetingRoomB
SSID ROOM_B
Access Mode Access Point
Security Setup WPA-PSK
WEP Key Format ASCII/128bit
WPA/WPA2 Encoding TKIP
WEP Key/WPA/WPA2 Pass Phrase 1234567890abc
DHCP Off
IP Address 192.168.10.1
Subnet Mask 255.255.255.0
Default Gateway (To match wireless LAN access point settings.)
Channel Auto