Filter
Top Products
55
4
Configure the settings on the dialog box.
z In this example, we will use the following settings.
z For details about each of the settings on the dialog box, see “Manual Connection Setting
Reference” (
page 77).
5
After configuring all of the settings you want, click the [Register] button.
z This will register your settings as a new connection profile (named “Manual Connection
Test” here) and return to the connection profile switching dialog box in step 1. The newly
created profile (Manual Connection Test) will be selected on the dialog box.
6
Repeat steps 1 through 5 for all of the other computers.
z For the settings in step 4, simply change the IP address as shown below.
Computer 2: 192.168.100.10
Computer 3: 192.168.100.11
Computer 4: 192.168.100.12
Dialog Box Item Setting
Profile Name Manual Connection Test
SSID CASIO_DPJ
Access Mode Ad Hoc
Security Setup WEP
WEP Key Format ASCII/128bit
WEP Key/WPA/WPA2 Pass Phrase 1234567890abc
DHCP Off
IP Address 192.168.100.1
Subnet Mask 255.255.255.0
Default Gateway 0.0.0.0
Channel Auto