Filter
Top Products
26
IV. Hardware Setup
IV. Hardware Setup
AP8000 Hardware Reference Guide
Removing Hot-
Swap Trays
The main hard disks are mounted
in internal hot-swap trays for
easy replacement. A lock secures
the handle and switches ON or
OFF the power to the hard drive.
To remove the tray, unlock the
tray and pull on the handle.
Hot-Swap Trays
• 4-8. Hot-Swap Trays
Lock/
Power
ON
Unlock/
Power OFF
Hot-Swap Tray
Usage
Each hot-swap tray provides an
aluminum carrier for a single
SCSI hard disk drive. The alumi-
num tray provides protection and
maximum heat dissipation for al-
most all types of high speed SCSI
disk drives. The provided cables
and wires connect to the SCSI
hard disk drive and screws are
needed to secure the tray to the
bottom of the SCSI hard disk
drive.
SCSI Cable
Power
Connector
Activity LED
(ALED)
SCSI ID
Aluminum
Tray
If using Ultra-wide devices, make sure the termination is
disabled.
NOTE