Filter
Top Products
26
LX505/LX605 User Manual
002-000232-01 Rev.1 (12-2009)
Basic Operation
For detailed functions of each menu, see “Menu Tree” on pages 73-75.
Input 1 RGB(PC analog)
Input 2 RGB
Input 3 Video
Network
System Auto
Main Menu
Sub-Menu
Image select
For computer source, used to select an image level among Standard, Real, and Image 1-10 (p.40).
For Video source, used to select an image level among Standard, Cinema, and Image 1-10 (p.46).
Image adjust
For computer source, used to adjust the computer image. [Contrast/Brightness/Color temp./White balance (R/G/B)/
Offset(R/G/B)/Sharpness/Gamma/Reset/Store] (pp.41-42).
For Video source, used to adjust the video image. [Contrast/Brightness/Color/Tint/Color temp./White balance (R/G/
B)/Offset (R/G/B)/Sharpness/Gamma/Noise Reduction/Progressive/Reset/Store] (pp.47-48).
PC adjust
Used to adjust the parameters to match with the input signal format (pp.37-39).
Screen
For computer source, used to adjust the size of the image. [Normal/True/Wide/Full/Custom/Digital zoom +/-/Keystone/
Ceiling/Rear/Reset] (pp.42-44).
For Video source, used to adjust the size of the image. [Normal/Wide/Custom/Keystone/Ceiling/Rear/Reset] (pp. 49-
50).
Input
Used to select an input source (Input 1, Input 2, Input 3 or Network) (p.33).
Note: Network will be not displayed when optional Network unit is not attached.
Sound
Used to adjust the volume or mute the sound (p.28).
Information
Display the input source information: Input, H-sync freq., V-sync freq., Screen, Language, Lamp status, Lamp counter,
Filter counter, Power management, Key lock, PIN code lock, Shutter management, Simple mode, Remote control,
and SERIAL NO. (p.29).
Guide
The key operation is displayed.
Setting
Used to set the projector’s operating configurations (pp.51-62).
Network
See the owner’s manual of “Network Set-up and Operation”.
Menu Bar