Filter
Top Products
39
LX505/LX605 User Manual
002-000232-01 Rev.1 (12-2009)
Computer Input
Note:
• Display area (H/V) cannot be selected when 480i, 575i,
480p, 575p, 720p, 1035i or 1080i is selected in the PC
System Menu (p.36).
• When input computer signal to the projector, PC adjust function
will become available.
Auto PC adj.
Fine sync
Total dots 1366
Position H 0
Position V 0
Current mode
Clamp 0
Display area H 1024
Display area V 768
Reset
Mode free
Store
0
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
Mode 7
Mode 8
Mode 9
Mode 10
0
0
Total dots 1344
Position H 255
Position V 34
Display area H 1024
Display area V 768
Where to free?
store?
Store
Total dots
Position H
Position V
Display area H
Display area V
0
0
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
Mode 7
Mode 8
Mode 9
Mode 10
Free
0
0
Total dots 1344
Position H 255
Position V 34
Display area H 1024
Display area V 768
Where to store?
Vacant
This mode has stored
parameters.
Values of Total dots, Position H,
Position V, Display area H and
Display area V.
Press the SELECT button to
store the data.
Press the MENU button
to close this dialog box.
Mode free
Store
To store the adjusted data, select Store and then press the Point
► or the SELECT button. Move the highlight to one of the Modes
1 to 10 in which you want to store, and then press the SELECT
button.
To clear the stored data, select Mode free and then press the Point
► or the SELECT button. Move the highlight to the Mode that you
want to clear and then press the SELECT button.
To reset the adjusted data, select Reset and press the SELECT
button. A confirmation box appears and then select Yes. All
adjustments will return to their previous figures.
Reset
Mode free
Store
Press the SELECT
button to clear the
stored data.