Filter
Top Products
61
LX505/LX605 User Manual
002-000232-01 Rev.1 (12-2009)
Shutter function is available to block out light to the screen, so that
the screen can be used for the other presenters.
Prohibit the shutter operation from the remote control and the
projector's side control.
Remote control .. Selecting On prohibits the shutter
operation from the remote control.
Projector .... Selecting On prohibits the shutter
operation from the side control.
It is possible to prohibit the shutter operation from both of the
remote control and the side control.
Protection
The Shutter Management function turns off the projection lamp
when the projector is left with the shutter closed and the set time
has passed away. The count-down time can be set between 5
and 180 minutes. When the count-down time has elapsed, the
shutter will be opened up automatically and the lamp will be
turned off to cool itself down. The SHUTTER indicator is blinking
blue during this cooling-off period. When the lamp has been fully
cooled down, the POWER indicator turns green lighting and the
SHUTTER indicator keeps blinking. Should the ON / STAND-BY
button be pressed in this condition, the projection lamp will be
turned on and the SHUTTER indicator turns off.
Note:
The Shutter Management function cannot be halted.
Standby mode Network
On start On
Pointer Dot
P-Timer
Security
Shutter
Video delay control Off
Filter counter
Test pattern
Factory default
Setting
Shutter
Off
Shutter
Protection
Projector
Remote control Off
Management 180 Min
When you want to make a digital processing of a projected
image faster, set this function.
Use the Point ▲▼ buttons, select an item of Off/Low/Mid/High.
Digital processing speed becomes fast by order of Low → Mid →
High. High is the fastest.
Shutter
Management
Video delay control
Fig.1
Note:
-The following functions are not available respectively when Video delay
control is set to Low/Mid/High.
Low ... Keystone can not be selected.
Mid ... Progressive and Noise reduction can not be selected.
High ... Keystone, Progressive and Noise reduction can not
be selected.
-When Video delay control function is set to Low or High and press the
KEYSTION button on the remote control, Fig.1 will be dispalyed on the
bottom left screen.
Video delay : On