Filter
Top Products
45
LX505/LX605 User Manual
002-000232-01 Rev.1 (12-2009)
If the projector cannot reproduce proper video image, select a
specific broadcast signal format from among PAL, SECAM, NTSC,
NTSC 4.43, PAL-M, and PAL-N.
The projector automatically detects an incoming video signal, and
adjusts itself to optimize its performance.
When the Video System is 1035i or 1080i, select the system
manually.
If the projector cannot reproduce proper video image, select a
specific component video signal format from among 480i, 575i,
480p, 575p, 720p, 1035i, 1080i, and 1080p.
Video Jack or S-video Jack
The projector automatically detects an incoming video system, and
adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system
manually.
Video Input
1
AV System Menu (Video or S-video)
AV System Menu (Y, Pb/Cb, Pr/Cr)
2
Input 1 RGB(PC analog)
Input 2 RGB
Input 3 Video
System NTSC
Input 1 RGB(PC analog)
Input 2 RGB
Input 3 Y, Pb/Cb, Pr/Cr
System Auto
Video
Y, Pb/Cb, Pr/Cr
1080p
1080i
1035i
720p
575p
480p
575i
480i
Press the MENU button to display the On-Screen Menu. Use
the Point ▲▼ buttons to select Input and then press the Point
► or the SELECT button.
Use the Point ▲▼ buttons to select Video, S-video or Computer
1(Component) and then press the SELECT button.
3
Use the Point ▲▼ buttons to select System and then press
the Point ► or the SELECT button. Use the Point ▲▼ buttons
to select the desired system and then press the SELECT
button.
Note:
The AV System Menu cannot be selected when selecting
RGB (Scart).
Video System Selection
Auto
Y, Pb/Cb, Pr/Cr Jacks
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
Auto
Y, Pb/Cb, Pr/Cr SIGNAL FORMAT