Filter
Top Products
10
52. Engage the glove box (1) hinges to the instrument
panel.
53. Press the two glov e b ox st ops (2) and raise the glove
box upward.
54. Close the glove box.
55. Position the instrument panel center bezel (1) near the
IP and connect the wire harness connectors.
56. Install the instrument panel center bezel onto the IP
and fully engage the retainer clips.
57. Install the two lower screws (2).
58. If nec essary, install the cl
ose out panel (2) or
cupholder and install the s
crews (3).
Aug 08, 2008 K6860631 Rev. 1