Filter
Top Products
10
46. Using hand pressure, push the retractor cover (1)
downward over the retractor (3) far enough to engage
the two locator pins in the top of the inboard cover
half with the locator holes in the top of the retractor.
47. Install the two plastic push-pin retainers (2) that se-
cure the retractor cover to the retractor.
QUAD CA B
48. Position the cowl trim panel in the vehicle with
the door
sill scuff plate end (1) of the trim panel angle
d upward.
Seat the upper outer end of the trim panel unde
rneath
the dash panel and engage the retaining tabs
that se-
cure the trim panel to the cowl.
49. Align the retaining tabs on the door sill
scuff plate end
of the trim panel with the retaining cli
ps (2) in the front
door sill (3) and engage the retaining
tabs that sec ure
the trim panel to the d oor sill.
Aug 08, 2008 K6860631 Rev. 1