Filter
Top Products
C-1
Cisco 11500 Series Content Services Switch Hardware Installation Guide
78-13884-06
APPENDIX
C
Connecting a Modem to the CSS
This appendix explains how to configure a dial-up modem and connect it to the
console port on the CSS. Connecting a modem to the CSS allows you to remotely
perform the same CSS console operations as you would locally. The CSS supports
the following modems:
• 3Com (US Robotics) Courier Model 3453 Modem
• 3Com OfficeConnect Model 3294 Modem
• 3Com (US Robotics) Sportster Model 5686 Modem
• MultiTech Model MT5634ZBA Modem
This appendix includes the following sections:
• Configuring a Modem
• Cabling a Modem to the CSS
Configuring a Modem
You must configure the modem before you can connect it to the CSS. You can
connect the modem to a terminal or a PC using a terminal emulation program,
such as Hyperterm. If you connect the modem to the COM port on a PC, you need
the following cable and connectors (see Appendix B, Cable Connector Pinouts):
• RJ-45-to-RJ-45 rolled cable
• RJ-45-to-DB-25 modem adapter
• DB-9-to-RJ-45 terminal adapter