Filter
Top Products
C-3
Cisco 11500 Series Content Services Switch Hardware Installation Guide
78-13884-06
Appendix C Connecting a Modem to the CSS
Cabling a Modem to the CSS
Make sure that the settings on the remote console match the CSS default settings
specified in Table C-1.
Note When you remotely log in to the CSS through a modem, make sure that you log
out before disconnecting from the session. Use the idle timeout minutes
command to set the maximum amount of time that the console session can be idle
on the CSS before the CSS logs it out. By default, the timeout is disabled.
Table C-1 CSS Console Port Default Settings
Parameters Default Settings
Baud 9600
Data Bits 8
Parity None
Stop Bits 1
Terminal Type VT100/ANSI
Flow Control None