Filter
Top Products
23
Catalyst 6000 Family Network Analysis Module Installation and Configuration Note
78-10406-05
Configuring the NAM
Source VLANs:
RX Only: None
TX Only: None
Both: None
Destination Ports:None
Filter VLANs: None
Session 2
---------
Source Ports:
RX Only: None
TX Only: None
Both: None
Source VLANs:
RX Only: None
TX Only: None
Both: None
Destination Ports:None
Filter VLANs: None
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#monitor session 1 source vlan 1 both
Note The SPAN destination for the NAM must always be port 1.
Router#
00:21:10:%SYS-5-CONFIG_I:Configured from console by console
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#monitor session 1 destination interface gi 8/1
Router#show monitor
Session 1
---------
Source Ports:
RX Only: None
TX Only: None
Both: None
Source VLANs:
RX Only: None
TX Only: None
Both: 1
Destination Ports:Gi8/1
Filter VLANs: None
Session 2
---------
Source Ports:
RX Only: None
TX Only: None
Both: None
Source VLANs:
RX Only: None
TX Only: None
Both: None
Destination Ports:None
Filter VLANs: None
Router#