Filter
Top Products
4
Catalyst 6000 Family Network Analysis Module Installation and Configuration Note
78-10406-05
Overview
• The licensed Application Response Time (ART) MIB, which is used to determine the source of the
slowdowns in application performance. The ART MIB measures the response time on the network
at the transport layer.
Note You must purchase an ART MIB license from Cisco Systems before enabling and using
the ART MIB feature.
• The licensed voice-monitoring application.
Note You must purchase a separate software license to enable voice collection on the NAM.
• Both Media Gateway Control Protocol (MGCP) and Session Initiation Protocol (SIP) voice
protocols are now supported.
• Signalling Connection Control Part (SCCP) and H.323 voice protocols are now supported.
• The trap destination table is available when you enter the show snmp CLI command.
Note Cisco IOS does not support the show snmp CLI command.
• You can upgrade the maintenance image while the application is running.
Front Panel Description
The NAM front panel (see Figure 1) includes a STATUS LED, hard drive LED, SHUTDOWN button,
and PCMCIA slot.
Figure 1 Network Analysis Module
STATUS LED
The STATUS LED indicates the operating states of the NAM. Table 1 describes the LED operation.
NTWK ANALYSIS HDL
HD
SHUTDOWN
For Vendor Use Only
WS-X6380-NAM
STATUS
PCMCIA
SLOT
1
0
EJECT
33089
STATUS LED PCMCIA slot
SHUTDOWN button Hard drive
(HD) LED
Table 1 STATUS LED Description
Color Description
Green All diagnostic tests pass. The NAM is operational.
Red A diagnostic other than an individual port test failed.