CHAPTER
Configuring Tag Switching 5-1
5
Configuring Tag Switching
This chapter describes how to configure tag switching, and includes the following sections:
• Software Restrictions
• Configuring Tag Switching on an ATM Switch Router
• Configuring Tag Switching on a Router
• Tag Switching Configuration Example
Note For more software configuration information about tag switching, refer to the
ATMSwitch Router Software Configuration Guide. Refer to the ATMSwitch Router
Command Reference publication for command syntax.
Software Restrictions
The software restrictions for tag switching follow:
• Open Shortest Path First (OSPF) is the only routing protocol currently supported.
• IP is the only network layer protocol currently supported.