Filter
Top Products
4-46
Cisco IOS XR Getting Started Guide
OL-10957-02
Chapter4 Configuring General Router Features
Where to Go Next
Examples
In the following example, the manual system clock is configured:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# clock timezone pst -8
RP/0/RP0/CPU0:router(config)# commit
RP/0/RP0/CPU0:router(config)# end
RP/0/RP0/CPU0:router# clock set 14:12:00 10 feb 2004
14:12:00.090 PST Tue Feb 10 2004
RP/0/RP0/CPU0:router# clock update-calendar
RP/0/RP0/CPU0:router# show clock
14:12:00.090 PST Tue Feb 10 2004
Related Documents
Where to Go Next
When you have completed the configuration procedures in this chapter, consider the following resources
for additional configuration documentation:
• For information on configuring additional general router features, see Chapter 5, “Configuring
Additional Router Features.”
• For information on using the Cisco IOS XR software more efficiently, see Chapter 6, “CLI Tips,
Techniques, and Shortcuts.”
• For information on configuring interfaces, see the hardware documents listed in the “Related
Documents” section on page x.
Related Topic Document Title
Descriptions of the clock commands available in the
Cisco IOS XR software
Cisco IOS XR System Management Command
Reference
Commands used to configure the NTP Cisco IOS XR System Management Command
Reference
Configuration of the NTP on the Cisco IOS XR software Cisco IOS XR System Management Configuration
Guide