Filter
Top Products
2-28
Cisco IE 2000 Switch Hardware Installation Guide
OL-25818-04
Chapter 2 Switch Installation
Connecting to Power
Connecting Power to the Switch PoE DC-Input (Optional)
This procedure is applicable only to the IE 2000 switch models that are PoE capable. If you have a PoE
capable IE 2000 switch and do not plan on using PoE, you do not need to attach power to the PoE
DC-input connector; the switch can operate without the connection being made.
The following example shows how a second power supply is connected to the switch to support PoE.
Warning
An exposed wire lead from a DC-input power source can conduct harmful levels of electricity. Be sure
that no exposed portion of the DC-input power source wire extends from the connector(s) or terminal
block(s).
Statement 122
Caution Do not over-torque the PoE power connector’s captive screws. The torque should not exceed 2 in-lb
(0.23 N-m).
Note The input rating is 48/54VDC 2.5A.
1 Power connector
2 PoE power connector