2-48
Cisco IE 2000 Switch Hardware Installation Guide
OL-25818-04
Chapter 2 Switch Installation
Where to Go Next
• Start the Cisco Network Assistant application, which is described in the Getting Started with Cisco
Network Assistant guide. Using the GUI, you can configure and monitor a switch cluster or an
individual switch.
• Use the CLI to configure the switch as an individual switch from the console. See the Command
Reference on Cisco.com for information about using the CLI.
• Start an SNMP application such as the CiscoView application.
• Start the Common Industrial Protocol (CIP) management tool. You can manage an entire industrial
automation system with the CIP-based tools.