Filter
Top Products
12
This warning applies to all switches except the Cisco ME 3400G-2CS switch:
Warning
Before performing any of the following procedures, ensure that power is removed from
the DC circuit.
Statement 1003
Warning
Class 1 laser product.
Statement 1008
Warning
A readily accessible two-poled disconnect device must be incorporated in the fixed
wiring.
Statement 1022
Warning
This equipment must be grounded. Never defeat the ground conductor or operate the
equipment in the absence of a suitably installed ground conductor. Contact the
appropriate electrical inspection authority or an electrician if you are uncertain that
suitable grounding is available.
Statement 1024
This warning applies to all switches except the Cisco ME 3400G-2CS switch:
Warning
Only trained and qualified personnel should be allowed to install, replace, or service
this equipment.
Statement 1030
Warning
To prevent bodily injury when mounting or servicing this unit in a rack, you must take
special precautions to ensure that the system remains stable. The following guidelines
are provided to ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with
the heaviest component at the bottom of the rack.
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or
servicing the unit in the rack.
Statement 1006