Filter
Top Products
3-18
Administrator’s Guide for Cisco MeetingPlace Video Integration Release 5.3
OL-6280-01
Chapter 3 Installing Cisco MeetingPlace Video Integration
Installing Cisco MeetingPlace Video Integration
Step 2 If you will install Cisco MeetingPlace Video Integration in the DMZ, and if the Cisco IPVC MCU is
installed behind the firewall, open TCP port 3336 through the firewall to allow you to connect
Cisco MeetingPlace Video Integration to the Cisco IPVC MCU.
Gathering Installation Values
You need to know the following in order to install Cisco MeetingPlace Video Integration:
Installing Cisco MeetingPlace Video Integration
Step 1 Make sure you have completed all prerequisite tasks documented in this chapter.
Step 2 Make sure Cisco MeetingPlace is not in use. The Cisco MeetingPlace Video Integration installer will
stop the Cisco MeetingPlace Web Conferencing master service and all subordinate services.
Step 3 Make sure Cisco MeetingPlace Web Conferencing Release 5.3 is installed on the server on which you
will install Cisco MeetingPlace Video Integration.
Step 4 Make sure that the Cisco IPVC MCU is available on the network (reachable via its IP address).
Step 5 Run the Cisco MeetingPlace Video Integration Setup.exe and follow the prompts: Enter the values that
you collected in Gathering Installation Values, page 3-18.
Item Value
IP address or host name of the Cisco IPVC MCU.
----------------------------------------------------------
The unique, dedicated service prefix that
identifies Cisco MeetingPlace conferences on the
Cisco IPVC MCU. This number must not
coincide with other routing patterns that are
registered with Cisco CallManager or the H.323
gatekeeper.
----------------------------------------------------------
The operator or administrator account user name
and password on the Cisco IPVC MCU that
Cisco MeetingPlace Video Integration will use to
control video conferences.
----------------------------------------------------------
----------------------------------------------------------
The E.164 number or numbers assigned to the
Cisco MeetingPlace H.323/SIP IP Gateways.
If more than one Cisco MeetingPlace H.323/SIP
IP Gateway is connected to the same
Cisco MeetingPlace audio server, each IP
Gateway must have a unique E.164 number. List
up to five E.164 numbers, each separated by a
semicolon (;).
----------------------------------------------------------