Filter
Top Products
4-5
Administrator’s Guide for Cisco MeetingPlace Video Integration Release 5.3
OL-6280-01
Chapter 4 Configuring and Managing Cisco MeetingPlace Video Integration
About Managing Video-Conferencing Resources
Table 4-2 Conference and Port Parameters
Parameter Values Where Specified
Maximum number of
simultaneous
conferences that are
possible
This number depends on
settings in the
Cisco IPVC MCU.
This number is dynamically taken from
the Cisco IPVC MCU and cannot be
changed in MeetingTime.
To view the value:
In MeetingTime, click the Configure
tab, then Server Configuration, then
scroll down in the panel on the right to
Video conferences.
For information on Cisco IPVC MCU
hardware and configuration, see the
Cisco IP/VC 3511 MCU and Cisco
IP/VC 3540 MCU Module Administrator
Guide, Version 3.2 and Cisco IP/VC
3511 MCU and Cisco IP/VC 3540 MCU
Module Release Notes for Release 3.5.
If you increase the number of available
video conferences by changing settings
on the Cisco IPVC MCU, the value for
this parameter may not update until all
meetings that were in session when you
made the change have terminated.
Total number of ports
that are available to
Cisco MeetingPlace
video conferencing.
This value depends on
hardware and feature
configuration of the
Cisco IPVC MCU.
Choosing resource-intensive
features for the MeetingPlace
service on the
Cisco IPVC MCU may reduce
the number of
video-conferencing ports
available.
This number is dynamically taken from
the Cisco IPVC MCU and cannot be
changed in MeetingTime.
To view the value:
In MeetingTime, click the Configure
tab, then Server Configuration, then
scroll down in the panel on the right to
Video conference ports.
For information on Cisco IPVC MCU
hardware and configuration, see the
Cisco IP/VC 3511 MCU and Cisco
IP/VC 3540 MCU Module Administrator
Guide, Version 3.2 and Cisco IP/VC
3511 MCU and Cisco IP/VC 3540 MCU
Module Release Notes for Release 3.5.