Filter
Top Products
v
Cisco CNS Network Registrar Installation Guide
OL-6242-01
Preface
This guide describes how to install Cisco CNS Network Registrar 6.2 Beta on the supported operating
systems: Windows, Solaris, and Linux. It is written for the system administrators who will be installing
the software, and assumes that you understand your site configuration and the basic steps for installing
software. (For information on configuring and managing Network Registrar, refer to the Cisco CNS
Network Registrar User’s Guide.)
The guide is organized into these chapters and appendixes.
Obtaining Documentation
Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several
ways to obtain technical assistance and other technical resources. These sections explain how to obtain
technical information from Cisco Systems.
Cisco.com
You can access the most current Cisco documentation at this URL:
http://www.cisco.com/univercd/home/home.htm
You can access the Cisco website at this URL:
http://www.cisco.com
Chapter 1 Overview Introduces Network Registrar and provides critical system
information that must be read before installing the software.
Chapter 2 Installing and
Upgrading Network
Registrar
Describes how to install or upgrade Network Registrar; and how
to uninstall it, stop and start servers, and troubleshoot the
installation.
Appendix A Performing a Silent
Installation
Explains how to perform a silent installation, upgrade, or
uninstallation of the Network Registrar product.
Appendix B Lab Evaluation
Installations
Explains how to install, upgrade, or uninstall Network Registrar
if it is being used in a lab environment.