Filter
Top Products
17
5 Cable the Line Ports
.This chapter provides instructions for cabling the Cisco SCE8000 10 Gigabit Ethernet ports for single, cascaded, and MGSCP
topologies.
The 10 Gigabit Ethernet ports are located on the 10G SPA modules, which are installed in the SCE8000-SIP module in slot #3
of the Cisco SCE8000 chassis.
Warning
Class 1 laser. Avoid exposure to radiation and do not stare into open aperture.
SCE8000 Connectivity
The following tables summarize SCE8000 connectivity for the basic topologies.
Receive-only topologies use only Receive fibers.
Note Receive-only topologies can be implemented using either an optical splitter or a switch. If a switch is used, it must
support SPAN functionality that includes separation between ingress and egress traffic and multiple SPAN-ports
destinations.
Table 3 Single link inline connectivity
Table 4 Dual link inline connectivity
Table 5 Cascade connectivity
Port Link Side
3/0/0 Link 0 Subscribers
3/1/0 Link 0 Network
Port Link Side
3/0/0 Link 0 Subscribers
3/1/0 Link 0 Network
3/2/0 Link 10 Subscribers
3/3/0 Link 1 Network
This port on SCE8000 #1 Connects to this...
3/0/0 Subscriber side network element
3/1/0 Network side network element
3/2/0 (cascade port) port 3/3/0 on SCE8000 #2
3/3/0 (cascade port) port 3/2/0 on SCE8000 #2
This port on SCE8000 #2 Connects to this....
3/0/0 Subscriber side network element
3/1/0 Network side network element
3/2/0 (cascade port) port 3/3/0 on SCE8000 #1
3/3/0 (cascade port) port 3/2/0 on SCE8000 #1