Cisco Systems uBR10-LCP2-MC28C Network Card User Manual


 
Corporate Headquarters:
Copyright © 2003 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco uBR10-LCP2-MC28C Cable Interface Line
Card for the Cisco uBR10012 Router
OL-4653-01
July 2003
Purpose
This document provides instructions for removing and installing cable interface line cards.
Audience
This document is intended for use by a field service engineer who is familiar with Cisco products and
headend cable installation procedures.
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Tip Statement numbers (Statement 1030) at the end of a Warning refer to specific warnings and their
translations in the Cisco uBR10012 Regulatory Compliance and Safety Information document.
Scope
This document describes the Cisco uBR10-LCP2-MC28C cable interface line cards, how to install the
card in the Cisco uBR10012 universal broadband router, and how to remove and install the
Cisco MC28C in the Cisco LCP2 adapter card.