Filter
Top Products
6
Cisco uBR10-LCP2-MC28C Cable Interface Line Card for the Cisco uBR10012 Router
OL-4653-01
Cisco uBR10-LCP2-MC28C Overview
The Cisco uBR-MC28C cable interface line card has its own set of LEDs. Table 3 describes the LEDs
and their functions:
Table 2 Cisco uBR10-LCP2 Adapter Card LEDs and Their Functions
LED Status Description
Power Green
Off
Power is being supplied to the Cisco uBR10-LCP2.
Power is off.
Status
Status LED on N+1 or
redundant card in chassis
Yellow
Green
Blinking Green
The Cisco uBR10-LCP2 adapter card is in the bootup
process, self test, or downloading code.
The Cisco uBR10-LCP2 adapter card has
successfully completed the boot, self test. and code
download process.
The board is in Standby or Protect card mode.
Maintenance Off
Yellow
Normally off to indicate that there is no maintenance
action is required.
It is safe to remove the entire assembly from the
chassis (Cisco uBR10-LCP2 adapter card and Cisco
uBR10-MC28C cable interface line card).
Table 3 Cisco uBR-MC28C Cable Interface Line Card LEDs and Their Functions
LED Status Description
Enables Green
Off
Indicates that the cable interface line card is operating
normally, receiving DC power from the router
midplane, and configured for operation.
Either the card is shut down or the slot is not working.
Upstream Green
Off
For each upstream port, indicates that the upstream
path is enabled and configured.
Either the port is not properly configured, or is shut
down, or the slot is not working.
Downstream Green
Off
For each downstream port, indicates that the
downstream path is enabled and configured.
Either the port is not properly configured, or is shut
down, or the slot is not working.