Filter
Top Products
CBM1000 Service Manual
–
15
–
CITIZEN
7. Removing the Pressure Arms
(1) Disengage the EXT spring-01 from the
pressure arm-L and then remove the
pressure arm-L from the main chassis.
(2) Disengage the EXT spring-01 from the
pressure arm-R and then remove the
pressure arm-R from the main chassis.
(3) Remove the one screw M3 × 6 (ST) from
the main chassis.
Note on reassembling:
Securely insert the pressure arm-L/R
into the screw heads.
8. Removing the Stepping Motor and Brake
(1) Remove the two screws M3 × 4 and de-
tach the stepping motor.
(2) Remove the one screw M3 × 6 (ST) and
detach the brake.
Notes on reassembling:
Reassemble the brake in the direction
shown in the figure.
When reassembling the stepping motor,
position it so that its cable runs down-
ward as shown in the figure.
M3
×
6 (ST)
Main Chassis
Pressure Arm-R
EXT Spring-01
Pressure Arm-L
M3
×
6 (ST)
Main Chassis
Brake
M3
×
4
Stepping Motor