Support User Manuals

Citizen CL-S703 Label Maker User Manual

Open as PDF

of 80

53

Printer Operation

Menu Setup Mode (p.37)

Menu Setting Table (p.43)

..... 0 to 33%

..... 33 to 66%

..... 66 to 99%

..... 100% (The LCD will indicate an error if you attempt to print in this state)

..... When the door is released

..... Rewinder function off

On Line

Ready

Rewind

O f f

Setting the menu for the Rewinder

(CL-S700R only)

Set the Menu Setup Mode as follows to use the rewinder function.

When rewinding the liner using the peeler

Ensure that the "Function Sel (sub menu)" is set to "Peel On".

When the "Auto Config (sub menu)" is set to "On", "Peel On" mode is

automatically selected.

When rewinding printed media without using the peeler

Set the "Function Sel (sub menu)" is set to "Rewind".

IMPORTANT!

If the “Rewind” operation is to be used permanently, you must switch the “Auto

Config” menu option to “Off”. Otherwise, when the printer is switched on again,

the Auto Configuration selects Peel mode by default.

Rewinder Capacity Display

The LCD shows how much liner or media is on the rewinder flange at any given

time. If the rewinder is full, an error will be displayed on the LCD.

previous next