Filter
Top Products
22
English
Chapter 4 - Initial Setup Mode
Many of the functions and settings of the printer can be set in the Initial Setup Mode, through the
control panel.
These settings are stored in the printer and will be remembered when the printer is switched
off. This can include settings such as the standard page length, the language or character set
used, etc.
Details of these options are shown in the following section. You can also reset the printer to its
factory settings using the Factory Initialisation function.
Factory Initialisation
To return all current settings to the standard “factory settings”, follow the steps below.
- While pressing LOAD/PARK , turn the power on, then release.
- Press TEAR OFF .
- Press LOAD/PARK to exit the Initial Setup mode.
Entering Initial Setup Mode
With the printer switched ON, load a sheet of paper. Then turn the printer off.
While pressing LOAD/PARK, turn the power on to enter the Initial Setup mode. When you
release the LOAD/PARK key, the current printer settings will be printed automatically.
The QUIET indicator, POWER indicator, ON LINE indicator and FONT indicators will be blinking.
Press and release the FONT button (5) and / or ON LINE (4) to select the item.
Each time you press FONT and/or ON LINE, you will advance to the next item.