Filter
Top Products
31
English
Paper Specifications
It is recommended that paper which may be used with this unit is within the specification
provided below.
Fanfold Paper
Width: 3 to 10 inches, 76.2 to 254 mm
To insure optimum print quality, 60-82.5 g/m
2
is recommended for graphic printing. In multilay-
ered paper with carbon, the carbon is equivalent to a sheet of paper.
When Bottom Feeding, the printer will handle multi-part forms up to 0.43 mm thick. Up to 6
copies of 53 g/m
2
chemical release paper can be used.
When Rear Feeding, the printer will handle multi-part forms up to 0.36 mm thick. Up to 5 copies
of 53 g/m
2
chemical release paper can be used.
Continuous Labels
Width of the backing sheet: 76.2-254 mm
Thickness of the backing sheet: 0.07-0.09 mm
Total thickness: 0.16-0.19 mm
Label weight: 68 g/m
2
Quality: fine-quality paper
Label size: 63.5 mm minimum width
23.8 mm minimum height
Use only labels mounted on continuous backing sheets in bottom tractor mode only. Depend-
ing on the thickness of the label or a kind of the glue, some labels may not be usable.
Single Sheet
Width: 102 - 297 mm
Height: 127 - 363 mm
Weight: 52.5 - 90 g/m
2
Paper should be within operating temperature and humidity ranges at least 24 hours prior to
use. Due to letter head varying in paper weight and construction, we cannot guarantee print
quality and paper handling for all types.
Envelopes
Since envelopes vary in size, paper weight and construction, print quality cannot be guaranteed
for all types of envelopes.
To ensure good print quality, printing should not occur in areas where the edges overlap.
Envelope
Printing Area