Filter
Top Products
Chapter 1 Setup
19
2 Part Names and Functions
Rear view
Serial interface connector
To connect the serial interface cable.
Parallel interface connector
To connect the parallel interface cable.
Power switch
To turn on or off the power. (See Chapter
2.)
Power inlet
To connect the power cord.
PCMCIA memory card cover
To protect the PCMCIA memory card
from exposure to dust and foreign
matter. To install a PCMCIA memory
card, first unhook this cover, then slide it
out. (See Appendixes.)
• When opening the cover, open it all the way. If only part way open, the cover could
slam shut, possibly causing injury.
• Be careful of the edge of the cover when the cover is opened. It may cause injury or
property damage.
• Be careful of the edges of the plates so injury or property damage is possible.
CAUTION