Filter
Top Products
Before Operation
28
5 System Maintenance Mode
In this mode, the communication, adjustable sensor ON/OFF and sensor voltage
selections are set up. The printer configuration settings are stored in memory so they are
maintained even after the power is turned off. Control keys function as follows:
Example
Setting the black line sensor voltage
1. First turn off the power switch, then press and hold down the Pause, Feed and Stop keys
simultaneously while turning on the power switch.
2. Change the baud rate to the sensor voltage setting with the Pause key.
Pressing all these keys
simultaneously places the printer
into system maintenance mode.
Return to normal
operating mode.
Selects the mode item.
Selects the mode.